DryWay Water-Repellent Concrete Sealer (5 Gal)
A ready to use, water-based, penetrative siloxane/silane water repellent for concrete and masonry surfaces.
Specially formulated for maximum penetration and durability, DryWay contains the highest siloxane/silane content in its class.
Treated surfaces will shed or bead water, dry more quickly, and remain “breathable”.
DryWay provides long lasting protection against pitting, spalling, chemical.
Non-Toxic and Low VOC
DryWay penetrates deep into the substrate to chemically bond and form a water-repellent barrier deep below the surface.
DryWay protects concrete driveways, bricks, pavers, and other porous masonry from deterioration, staining, cracking, spalling, freeze/thaw cycles, moss and algae growth.
It is easily applied with a hand-held garden sprayer, roller, or brush.
Treated surfaces will bead or shed water for years to come. It is like filling the pores with silicone caulk.
The seal does not trap water vapor and allows surfaces to breathe and dry out.
DryWay is resistant to UV-rays, heat, and oxidative degradation.
Moreover, it is hidden deep inside the pores from the sun and elements.
It will not yellow and there is no gloss.
The water-repellent barrier becomes an integral part of the substrate, there is no film to peel or wear off.
COVERAGE – Poured Concrete: 750-1000 sq. ft., Brick/Pavers: 600-750 sq. ft., Concrete Blocks: 400-600 sq. ft., Split face Blocks: 250-400 sq. ft.
|Dimensions||12 × 12 × 15 in|
Only logged in customers who have purchased this product may leave a review.